![]() |
|
|||||||
| SeTool 2 Post all your SE-Tools Problem and Discussion Here |
![]() |
|
|
Thread Tools | Display Modes |
|
#121
|
||||
|
||||
|
v0.915044
- fixed EROM UPGRADE feature for db2020 phones. it will be active when no settings set and RECOVERY pressed. thx to arash for reporting. - fixed s1 flash readout in .ssw mode, thx to kokoka for discovering. rapidshare FULL SETUP http://rapidshare.com/files/278534514/v0.915044.rar beta testing period ends on 13.09.2009 23:59 gmt+3. at the moment we decided to set prices as follows: Quote:
of corresponding level from our "best friends" pricelist. perhaps they will raise it to match ours (best for both teams), perhaps they will make it free again (aerix). finally, i should mention, that RESET mode is NOT PANACEA. it WILL NOT fix bad flash ic - which can be reason of initial GDFS corruption. alas, credits will NOT be returned in that case - take it as is or leave. credits will also NOT be returned in case of bad communication cables. that is especially valid for j132 pl2003-based "things".
__________________
.::Life is like a flat. It's up to you how to decorate it::. »I'm Dïëng a £ïtt£ë Evêryday«
|
|
#122
|
||||
|
||||
|
v0.915045
- fixed brown db201x handling. greatly . thx to jc_by for reporting. rapidshare FULL SETUP LINK http://rapidshare.com/files/279017048/v0.915045.rar
__________________
.::Life is like a flat. It's up to you how to decorate it::. »I'm Dïëng a £ïtt£ë Evêryday«
|
|
#123
|
||||
|
||||
|
v0.915050
- added alternative security bypass for semc a2 cid53 phones. that allow you to repair completely dead a2 cid53 phones: - destroyed trim area - foreign gdfs - damaged semcboot please note, that alternative security bypass for a2 cid53 IS NOT free and NOT STANDALONE (check below for prices) please note, that if you will execute alternative bypass mode for a2 cid53 in order to unlock/flash/etc - you will lose device key and drm functions possible will be damaged. usage of a2 cid53 alternative security bypass exactly same as for a2 cid49/52 - because several guys researched "mystery" of a2 .cxc and released own tools, i forced to release ".vkp" patching support for a2 phones. please note,that ".vkp" patching will only work on phones in r&d state. download link- http://rapidshare.com/files/281947907/v0.915050.rar
__________________
![]() always at ur service .::AZEEM::. |
|
#124
|
||||
|
||||
|
v0.915051
- added full support for upcoming semc db3350 phones. as there are no phones on market, we can not test it, so support for db3350 marked as HIGHLY EXPERIMENTAL. flashing/gdfs/filesystem operations should work flawlessly. full unlock via signature and "alternative bypass mode" SHOULD work too, but that things are absolutely not tested, so MAKE GDFS BACKUP before doing full unlock and only touch alternative security bypass if you absolutely crazy ![]() in any case, if phone will be killed - i will repair it for sure... well, you have been warned. please note, that alternative security bypass for a2 db3350 cid53 IS NOT free and NOT STANDALONE (check prices for details) please note, that if you will execute alternative bypass mode for a2 cid53 in order to unlock/flash/etc - you will lose device key and drm functions possible will be damaged. - in some VERY RARE cases lg db3200 phones became completely dead after unlock attempt or unlock/flashing procedure failed in start. that should be fixed now, at least i received many good reports ------------------------------------------------------------- ------------------------------------------------------------- v0.915052 - tested,fixed and apporved support for db3350 phones, thx to imobile as my "dear friends" used to say: world first, genuine,blablabla,etc. anyway, i'm sure everything works now for db3350 - - full signature unlock - altbypass mode - flashing,filesystem,gdfs,trim area operations. - regarding a2 cid53 phones: use full signature unlock for FULLY GENUINE unlock. it is fast and furious (tm) use alternative bypass mode for completely damaged phones. it is slower, but can fix any software problem. in next 2-3 days i will release next version, which will not damage device key in a2 cid53 phones when using alternative bypass mode. (need to arrange reset station upgrade, that require some time) in any way, i strongly recommend to use full signature unlock for a1/a2 phones - it is absolutely genuine and can not tamper anything. http://rs662tl4.rapidshare.com/files.../v0.915052.rar ======================================= SETOOL UPDATE v0.915053 v0.915053 - a2 cid53 alternative bypass will not damage device key anymore. because of that one more phone restart required, but who cares ? - "unlock during flash" enabled for s1 phone patch unlock - some not important fixups, thx to imobile for bugreports. rapidshare FULL SETUP LINK : http://rs649l33.rapidshare.com/files.../v0.915053.rar http://rs649tl.rapidshare.com/files/.../v0.915053.rar
__________________
![]()
|
| The Following User Says Thank You to .::LUQMAN::. For This Useful Post: | ||
|
#125
|
||||
|
||||
|
i think and decided - wtf.
lets allow everybody test so, here it goes. http://rapidshare.com/files/302566943/v0.915055.rar notes: satio can be found in PDA tab in order to boot satio you MUST check "signed mode" before unlock ALWAYS do gdfs backup and store it safe place. if unlock will fail, please attach backup package here, i will fix it asap. unlock will cost 1 credit. unlock is full genuine signature unlock, no reset crap. beware - unlock is only tested on mine pda, but should work read flash requires "signed mode" and "alternative bypass" checked. read flash require 1 credit for one phone (if phone was unlocked by setool2 - it will be free) please note,that users do not need read flash feature, it is only for hackers and so on. satio omap nand flash starts at 8000000 to reset user code - check only signed mode and press unlock if "unlock after flash" checked - user code will be reset after flashing. actually, flashing will always reset user lock in any case to flash satio you must add zip package to firmware area. do not unzip it !!!! just add. i did not tested cross flashing u1i to u1a and back, so use it on own risk. at the moment r1b017 packages uploading, that will take awhile.
__________________
.::Life is like a flat. It's up to you how to decorate it::. »I'm Dïëng a £ïtt£ë Evêryday«
|
|
#126
|
||||
|
||||
|
Se tool update v0.915056 (6-11-2009)
v0.915056 - added full support for s1_open PDA phones (satio). big thanks to: cowboy, hardstone, shadowman,kris.sg for testing, arash for logo. notes: in order to boot satio you MUST check "signed mode" read flash requires "signed mode" and "alternative bypass" checked. satio omap nand flash starts at 8000000 to execute network unlock/repair - check both "signed mode" and "perform full unlock" then press unlock to reset user code - check only signed mode and press unlock if "unlock after flash" checked - user code will be reset after flashing. to flash satio you must add zip package to firmware area. do not unzip it !!!! just add. - added possibility of generating new password for account. rapidshare FULL SETUP LINK
__________________
.::Life is like a flat. It's up to you how to decorate it::. »I'm Dïëng a £ïtt£ë Evêryday«
|
![]() |
| Bookmarks |
| Tags |
| news, released, setool, software, update, updates |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|