Results 1 to 5 of 5

Thread: Error connecting U F S: H WK SD REPAIR ERROR:-5

  1. #1
    Join Date
    Oct 2010
    Age
    40
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts
    reppower
    0

    Thumbs up Error connecting U F S: H WK SD REPAIR ERROR:-5

    hi g s m lover team
    Error connecting U F S: H WK SD REPAIR ERROR:-5
    how to repair plz give solution now

  2. #2
    Join Date
    Jul 2009
    Posts
    16,962
    Thanks
    33
    Thanked 38 Times in 38 Posts
    reppower
    685

    Default Re: Error connecting U F S: H WK SD REPAIR ERROR:-5

    Hwk/ufs box error & solution
    1.HWK SD REPAIR ERROR: ***xx
    HWK upgrade error. This error occurs when HWK what affected by third-party tools before upgrade or your HWK is a clone. Please do not contact anyone; it's your own stupid fault.


    2. Your account is suspended. Please contact your reseller!
    Your account is blocked by administrator. Please contact your reseller
    You need to Provide your reseller at least the following information:
    - The date and invoice number of your HWK purchase
    - Full log given to you by upgrade client


    3. No more upgrade logs.
    HWK module with this serial number was already upgraded. If you already upgraded your HWK, you need not to upgrade it again until directed. If you have not tried to upgrade it yet, get this error on upgrade and cannot run latest software versions, please contact your reseller
    You need to Provide your reseller at least the following information:
    - The date and invoice number of your HWK purchase
    - Full log given to you by upgrade client


    4. Server is going to shutdown. Please try update in 20 minutes.
    Server is being stopped by administrator. Please try upgrade process again in 20 mins.


    5. Account for this HWK module does not exist on server. Please contact your reseller!
    Account for HWK with this serial number does not exist on server. Please contact your reseller.
    You need to Provide your reseller at least the following information:
    - The date and invoice number of your HWK purchase
    - Full log given to you by upgrade client


    6. Authorization failed! Are you using the latest HWK Upgrade client software version?
    Server authorization error. Please ensure you are using the latest UFS suite and upgrade software versions client


    7. Your account was closed by the server administrator. Please contact your reseller!
    Your account on server was closed by administrator. Please contact your reseller
    You need to Provide your reseller at least the following information:
    - The date and invoice number of your HWK purchase
    - Full log given to you by upgrade client


    8. Error: Your update client version is expired! Please download new client from the support area and start the upgrade again.
    Download new upgrade client from support area and try upgrading your HWK module with it.


    9. Error upgrading applets: HWK UPDATE ERROR: ******
    Hardware problem occurred during upgrade process. Please contact your reseller.
    You need to Provide your reseller at least the following information:
    - The date and invoice number of your HWK purchase
    - Full log given to you by upgrade client


    10. Error connecting to ufs: hwk login error: ***x
    Error Establishing data transmission channel with HWK module. Please ensure your module is present and is correctly installed. If you are unable to solve the problem by yourself - please contact your reseller
    You need to Provide your reseller at least the following information:
    - The date and invoice number of your HWK purchase
    - Full log given to you by upgrade client


    11. Authentication stage error: Server reported error: Not translated!
    Please select English language on the software's welcome page and retry upgrade process. Now error message will be shown correctly


    12. Connection to server failed: Socket Error # 10060
    13.Connection to server failed: Socket Error # 10061
    Connection refused.
    Please disable or uninstall all installed antivirus and firewall software and retry upgrade operation. If the error Persists, please ensure, that your internet provider is not using firewall so


    14. Authentication stage error: Socket Error # 10 053
    Software caused connection abort.
    General TCP / IP failure occurred. Please disconnect from internet (having your modem switched off for example), wait for 5-7 minutes and connect to internet again and retry upgrade process.


    15. Authentication stage error: Socket Error # 10 054
    Connection reset by peer.
    TCP / IP connection to server from your PC is unstable. Provider Please try to connect to internet via different internet. If you have no such possibility, please try to perform upgrade process several times until you get positive result.


    16. Connection Closed Gracefully.
    Connection to server was suddenly terminated. Please retry upgrade process a bit later or try to connect to the internet via another internet provider and retry the upgrade.


    17. Authentication stage error: Error: Server returned unrecognized reply.
    You are using an old version of the update client, please install the latest HWK Suite and use the update client from that version.


    18. License 5 not active.
    Please contact your reseller and request UFSx a set of license keys for your UFSx device.


    19.Box Auth Error 1
    The HWK module is built into the Flash device. The installation should solve the problem.
    20.Error 112-1-0219
    This error appears when a HWK *****er is used. Delete the following files (hwkkiller.dll ufsloader.dll) from this directory: C: \ WINDOWS \ system32
    Install HWK Suite then new.


    21. Authentication stage error: Server reported error: No more upgrade logs.
    There is no further update.
    22. Authentication stage error: Server reported error: Account for this HWK module does not exist on server. Please contact your reseller!
    Your account is not activated or it will not use a original HWK module.
    23.Error Connecting UFS: HWK Error: -1
    No HWK module built into the Flash device. HWK module or TOT (Broken)


    24.Error Connecting UFS: HWK Error: -3
    HWK serial number is blocked or not original.
    25.Box Auth Error -33
    this error code can be solved with the instructions on the following page: http://www.gsmlover.com/hwk/85146-re...tml#post206843


    26.Box Auth Error 20 / 32
    This error code can be solved with the instructions on the following page: REQ-> http://www.gsmlover.com/hwk/85146-re...tml#post206843


    Instructions for repair Error 20/32
    DO NOT, perform this process unless you have Box Auth Error 20, update client reports "use Update Firmware to Authorize UFS!" or you are advised to do Sun
    1. Run the update client.
    2. Select your language.
    3. Click "Next".
    4. Wait until the "Update UFS Firmware" button is enabled and then click it.
    5. Select req.fbi file, you will need to get this file from the support area.
    6. After a few seconds the process will complete and create a file called ******.req. (Where ****** is your UFS serial number)
    7. Send this file to your UFS reseller.
    8. When you receive ******.fbi from your UFS reseller, perform steps 1-4 above.
    9. Select ******.fbi
    10. After a few seconds your box will be authorized.
    Your UFS reseller is the only person who can help with this process, do not ask not here in the forum, we will generate ******.fbi files for you.
    NOTES: -
    1. Once you have made the ******.req file, do not perform any other steps on the box, since this will cause the file to ******.fbi be out of sync.
    Here is fbi calculator: SarasSoft_Emergency_Cleanup.reg
    27. hwk not connected or dead
    28. Error connecting ufs: hwk sd Repair error:-5
    29. Error connecting ufs: hwk sd Repair error:-9
    30. Error connecting ufs: 16 please reinstall Support Suite!
    31. box_error: 00000038.
    Here is a solution:
    http://www.gsmlover.com/hwk/85144-fr...tml#post206841


    32. CMT 2nd Boot CERT Mismatch / ERR: CMT ALG Boot CERT MISM
    Solution:
    Issue:
    ------
    Nokia phones give error:
    "ERR: CMT ALG Boot CERT MISM" or "CMT 2nd Boot CERT Mismatch" on "Check" or "Flash"

    Problem:
    --------
    Some UFS manufacturers used a National LP2951C M33 (3.3V) regulator, instead of a LP2951C M30 (3.0V) regulator (IC - U6)

    Workaround:
    -----------
    Change regulator to LP2951C M30

    If you are 100% sure that your UFS has the correct regulator of M30 and you have checked the output using a voltage meter, you should then check the phones hardware.
    33. I can’t install hwk suite1: run "Uninstall HWK Support Suite".
    2: run "Uninstall HWK Suite".
    3: run "SarasSoft_Emergency_Cleanup.reg"
    Here is a link SarasSoft_Emergency_Cleanup.reg
    4: now, install HWK_Support_Suite_Setup
    5: run "HWK Update Client and upgrade you hwk.
    34. Repair Dead Or Not Booting
    35. ufs is now USB <-> Dual serial
    YOU NEED 3 PRODUCT TO REPAIR DEAD OR NOT BOOTING UFS ....
    (1)MPROG FOR WRITING EEPROM
    (2)UFS MAINTENANCE V20
    (3)UPDATE AND FIXER
    CONECT UFS AND ITS ASK YOU DRIVER IF NOT ASKING DRIVER SO
    ITS SHOW YOU UNKNOWED DEVICE OR USB TO SERIAL
    DEVICE...JUST FORCE HIM TO ACCEPT DRIVER IN MPROG DRIVER FOLDER.......BECUSE IT CAN
    CONVERT IT TO FTDI...
    NOW SEARCH IT IN MPROG NOW ITS SHOW YOU ONE PROGRAMED DEVICE FOUND=1
    NOW WRITE EEPROM THAT I UPLOADED...
    AFTER IT EXIT IN MPROG.......
    NOW OPEN UPDATE & FIXER........
    CONNECT IT AND ENTER YOUR ORIGINAL SERIAL....
    TICK ON WRITE FIRMWARE AND WRITE EEPROM
    AND CLICK ON FIX & UPDATE.....
    IN FEW SECONDS....YOU DONE.......
    REMOVE UFS CABLE AND INSERT IT AGAIN.......
    DONE........UFS IS ALIVE.......
    IF SERIAL NUMBER IS NOT COMING THEN USE UFS MAINTENANCE V20 TO BUILD SERIAL NUMBER.....
    AND DO SAME PROCESS......

    Last edited by capricorn; 10-21-2010 at 08:14 PM.

  3. #3
    Join Date
    Apr 2007
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts
    reppower
    0

    Default Re: Error connecting U F S: H WK SD REPAIR ERROR:-5

    hwk sd repair error5 please give me solution

  4. #4
    Join Date
    Feb 2011
    Age
    28
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts
    reppower
    0

    Default Re: Error connecting U F S: H WK SD REPAIR ERROR:-5

    i have the same problem. can somebody help???

  5. #5
    Join Date
    Sep 2011
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts
    reppower
    0

    Default Re: Error connecting U F S: H WK SD REPAIR ERROR:-5

    ??????????? Help pliiiiiissss

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. i have sulation for ufs org error box-auth-error 20 - 32
    By melres. in forum Sarassoft - N-Box, Twister, UFSx, Tornado
    Replies: 13
    Last Post: 10-15-2013, 08:17 PM
  2. Sulation here for ufs org error box-auth-error 32
    By FULLFLASHGSM in forum Sarassoft - N-Box, Twister, UFSx, Tornado
    Replies: 1
    Last Post: 07-23-2008, 04:27 AM
  3. 6085 usb fleshing error (Error init usb flashing...
    By zargar in forum JAF by Odeon
    Replies: 1
    Last Post: 12-26-2007, 06:49 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •